TL-WA830RE 300Mbps Wireless N Range Extender User Guide
Figure 3-13 Quick Setup – Access Point Mode
¾Operation Mode - Two Operation Modes are supported, including: Access Point and Range Extender.
¾SSID - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s MAC address). This value is case-sensitive. For example, TEST is NOT the same as test.
¾Region - Specifies the region where the wireless function of the AP can be used. Select your region from the drop-down list. If your country or region is not listed, please contact your local government agency for assistance.
) Note:
Restricted by local law regulations, version for North America does not have region selection option.
¾Channel - This field determines which operating frequency will be used. The default channel is set to Auto, so the AP will choose the best channel automatically. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.
¾Mode - This field determines the wireless mode which the AP works on.
¾Channel Width - Determines the channel width to be used. It is unnecessary to change the default value unless required.
¾Max Tx Rate - Specifies the maximum transmit rate of the device through this field.
14
