TP-Link manual TL-WA830RE300Mbps Wireless N Range Extender User Guide

TL-WA830RE300Mbps Wireless N Range Extender User Guide

¾Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations to access the device.

¾Wireless Security - Wireless Security will enable you to configure wireless security for your wireless network to protect your data from intruders. There are four options, which are explained below.

•None - If the network of the desired AP/ Router is unsecured, please choose this option.

•WEP - If the Wireless Security of the desired AP/ Router is WEP, please select this option, then you will see the page display as shown below.

Type - Select the authentication type from the drop-down list. It must be the same as the desired AP/ Router’s.

WEP Key Format - Select WEP Key format from the drop-down list, which must be the same as the desired AP/ Router’s.

WEP Index - Select the index of the desired AP/ Router’s WEP Password. WEP Password - Enter the desired AP/ Router’s WEP Password here.

•WPA-PSK/WPA2-PSK - Select this option, the page will display as shown below.

Version - Select the authentication version from the drop-down list. It must be the same as the desired AP/ Router’s.

Encryption - Select the Encryption from the drop-down list, which must be the same as the desired AP/ Router’s.

PSK Password - Enter the desired AP/ Router’s PSK Password here.

•No Change - If you choose this option, wireless security configuration will not change. B. When you choose Access Point, you will see the following figure as shown below.

13