TP-Link TL-WA830RE manual Rear Panel

TL-WA830RE300Mbps Wireless N Range Extender User Guide

1.3.2 The Rear Panel

Figure 1-2

Viewed from left to right, the following parts are located on the rear panel of TL-WA830RE.

Wireless antenna：The external antenna is used to transmit and receive wireless data.

POWER: The power port connects to the power adapter provided with the TL-WA830RE 300Mbps Wireless N Range Extender.

LAN: One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or a router.

RESET: The Reset button is used to restore the AP’s factory default settings. There are two ways to reset the Access Point’s factory defaults:

zMethod one: With the AP powered on, use a pin to press and hold the Reset button (about 5 seconds) until the System LED becomes quick-flash from slow-flash. And then release the button and wait the AP to reboot to its factory default settings.

zMethod two: Restore the default settings from “System Tools > Factory Defaults” of the AP's Web-based management page.

)Note:

Ensure the AP is powered on before it restarts completely.

3