TP-Link manual TL-WA830RE300Mbps Wireless N Range Extender User Guide

TL-WA830RE300Mbps Wireless N Range Extender User Guide

Figure 3-12 Quick Setup – Range Extender Mode

¾Operation Mode - Two Operation Modes are supported, including: Range Extender and Access Point.

¾MAC of AP - The MAC address of the desired AP. The AP client will connect to the desired AP according to MAC address.

) Note:

1.In Range Extender mode, the wireless repeater relays signal between its stations and the root AP for greater wireless range. The MAC address of root AP can be automatically filled into corresponding box by clicking the Survey button and selecting the desired item.

2.If you know the MAC address of the desired AP, you can also input it into the field "MAC of AP" manually.

¾Region - Specifies the region where the wireless function of the AP can be used. Select your region from the drop-down list. If your country or region is not listed, please contact your local government agency for assistance.

) Note:

Restricted by local law regulations, version for North America does not have region selection option.

¾Channel Width - Determines the channel width to be used. It is unnecessary to change the default value unless required.

¾Max Tx Rate - Specifies the maximum transmit rate of the device through this field.

12