TL-WA830RE
300Mbps Wireless N Range Extender User Guide
Step 2: For the configuration of the wireless adapter, please choose “Enter a PIN from my access point” in the configuration utility of the QSS as below, and enter the PIN code of the AP into the field after “Access Point PIN”. Then click Next.
Figure 4-8 The QSS Configuration Screen of Wireless Adapter
)Note:
The default PIN code of the AP can be found in its label or the QSS configuration screen as Figure
You will see the following screen when the new device has successfully connected to the network.
Figure
)Note:
1.The QSS LED on the AP will light green for five minutes if the device has been successfully added to the network.
2.The QSS function cannot be configured if the Wireless function of the AP is disabled. Please make sure the Wireless function is enabled before configuring the QSS.
22
