Samsung AVMHC128CA0 Solving Common Problems, Wired Remote Controller, Wireless Remote Controller

Models: AVMDC052EA(B)0 AVMDC052CA0 AVMDC072CA0 AVMDC070EA(B)0 AVMDH070EA(B)0 AVMDH052EA(B)0 AVMDH072CA0 AVMHH128EA(B)0 AVMHH105CA0 AVMHH105EA(B)0 AVMHC105CA0 AVMHC105EA(B)0 AVMHH128CA0 AVMHC128EA(B)0 AVMHC128CA0 AVMDH052CA0

1 36
Download 36 pages 10.24 Kb
Page 33
Image 33
Solving Common Problems

Solving Common Problems

ENGLISH

Before contacting the after-sales service, perform the following simple checks.

They may save your time and expense of an unnecessary call.

Problem

Explanation/Solution

 

 

The air conditioner does not

Check that the breaker used for the air conditioner is switched on.

operate at all

 

Wired Remote Controller

The air conditioner does not operate with the remote controller

Wired Remote Controller is displayed on the wired remote controller. In this case, turn the air conditioner off and contact your dealer.

Wired Remote Controller

When turning on/off the air conditioner, it is not turned on/off immediately.

In case of using the wired remote controller for a group, the air conditioners connected to the remote controller are turned on/off in order. Thus, it takes some time(up to 32 seconds).

Wireless Remote Controller

The air conditioner does not

Check that there are no obstacles between you and the remote

operate with the remote

control sensor.

controller

Check the wireless remote controller batteries (Refer to page 11).

 

Check that you are close enough to the remote control sensor.

 

(seven metres/yards or less).

Wireless Remote Controller

No beep is heard when you

press Wireless Remote Controller (ON/OFF) on the remote controller

Check that you are pointing the remote controller at the remote control sensor on the receiver & display unit.

Replace the remote controller batteries if necessary.

If there is a strong light around the air conditioner, a three-wavelength light, a neon sign, etc., for example,

the air conditioner may not be operated with a remote controller. If this happens, use the remote controller close by the remote control sensor.

The air conditioner does

Check that the correct operating mode has been selected.

not cool or heat

The room temperature may be too low or too high.

 

Dust may be blocking the air filter guard; refer to page 30 or 31

 

for cleaning instructions.

 

Check that there is no obstacle in front of the outdoor unit.

 

 

When heating, the required

Check that the required temperature has been set correctly.

room temperature is never

Increase the fan speed.

reached and the air

 

conditioner frequently stops

 

 

 

E-33

Page 33
Image 33
Samsung AVMHC128CA0, AVMDH052CA0 Solving Common Problems, Wired Remote Controller, Wireless Remote Controller, English