TP-Link TL-WA7510N manual Dhcp, 5GHz 150Mbps Outdoor Wireless Access Point User Guide

Models: TL-WA7510N

1 171
Download 171 pages 6.63 Kb
Page 69
Image 69
This page will be refreshed automatically every 5 seconds.

TL-WA7510N

5GHz 150Mbps Outdoor Wireless Access Point User Guide

Figure 4-29 Wireless Statistics

¾MAC Address - the connected wireless station's MAC address.

¾Current Status - the connected wireless station's running status, one of STA-AUTH / STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected.

¾Received Packets - packets received by the station.

¾Sent Packets - packets sent by the station.

¾Belong To - the SSID that station belong to.

You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button.

If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return to the previous page.

)Note:

This page will be refreshed automatically every 5 seconds.

4.8DHCP

The DHCP (Dynamic Host Configuration Protocol) Server will automatically assign dynamic IP addresses to the computers on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses.

There are three submenus under the DHCP menu (shown as Figure 4-30):DHCP Settings, DHCP Clients List and Address Reservation. Clicking any of them will enable you to configure the corresponding function. The detailed explanations for each submenu are provided below.

61

Page 69
Image 69
TP-Link TL-WA7510N manual Dhcp, 5GHz 150Mbps Outdoor Wireless Access Point User Guide