Wiring to Power Supply

SAFETY WARNING

RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY QUALIFIED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.

9.Temporarily wire the hood to test for proper operation before installing. If the insert does not operate, check the circuit breaker or house fuse. If the insert is still not working, disconnect the power supply and check the continuity of all wiring connections.

10.Connect electrical wires.

11.Connect three wires (black, white and green) to house wires and cap with wire connectors. Connect wires according to their colors (i.e. black to black, white to white, and green to green). See Figure 3.

12.Store wires in the wiring box.

13.Determine the proper location for the Power Supply Cable. Make a wiring access hole using a drill bit. Install the wire cable and seal the gap around hole. Note: Connect all electrical wires before installing insert. DO NOT turn on the power until installation is complete.

Figure 4

Figure 5

Duct Work Installation

14.Use 6” steel pipe (follow building codes in your area) to connect the ducting on the hood to the ductwork above. Use duct tape to seal and secure joints as shown in Figure 4.

15.Please refer to local codes for the usage of the damper

(included). If necessary, remove the damper mechanism and install as exhaust connector.

Hood Preparation Before Installation

CAUTION: If moving the cooking range is necessary to install the hood, turn off the power in an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

16.Determine and mark the centerlines on the base of the wood frame where the insert will be installed.

17.Determine and make all necessary cuts in the wall or ceiling for the ductwork. Note: Install the duct work before installing the insert.

18.Cut out the opening where the insert will be installed. (Figure 5)

7

Page 9
Image 9
Kobe Range Hoods IN-027 Wiring to Power Supply, Duct Work Installation, Hood Preparation Before Installation

IN-027 specifications

The Kobe Range Hoods IN-027 is an exceptional kitchen ventilation solution that stands out for its blend of innovative technology, elegant design, and practical functionality. This range hood is crafted to enhance both the aesthetics and air quality of modern kitchens, making it an ideal choice for home chefs and cooking enthusiasts alike.

One of the standout features of the IN-027 is its powerful yet quiet operation. Equipped with a robust 600 CFM internal blower, this range hood efficiently eliminates smoke, steam, and cooking odors, ensuring a fresh and clean kitchen environment. Thanks to its advanced noise-reduction technology, the IN-027 operates at a whisper-quiet level, allowing you to carry on conversations without distraction even while the hood is in use.

Another defining characteristic of this range hood is its sleek and stylish design. The IN-027 features a commercial-grade stainless steel construction that not only enhances its durability but also adds a touch of elegance to your kitchen. The brushed finish is resistant to fingerprints and smudges, ensuring that it maintains its pristine appearance over time. With dimension options to fit various kitchen layouts, including 30-inch and 36-inch widths, the IN-027 can seamlessly blend into any design aesthetic, whether contemporary or traditional.

The IN-027 is also designed with user convenience in mind. Its intuitive controls allow for easy operation, letting you adjust fan speeds and lighting with minimal effort. The range hood comes with a dishwasher-safe baffle filter that effectively captures grease and contaminants, simplifying maintenance and ensuring long-lasting performance. Moreover, the built-in LED lighting illuminates your cooking area, making it easier to monitor food preparation.

Safety is paramount, and the IN-027 has you covered with its heat-sensitive auto shut-off feature. This smart technology automatically turns off the range hood after a certain period of operation, preventing overheating and potential hazards in the kitchen.

In summary, the Kobe Range Hoods IN-027 is an exemplary choice for anyone seeking an efficient, stylish, and user-friendly kitchen ventilation solution. With its powerful performance, elegant design, and thoughtful features, it not only enhances your cooking experience but also contributes to a healthier indoor environment. Whether you are sautéing, grilling, or baking, the IN-027 ensures that your kitchen remains a pleasant space, free from unwanted odors and smoke.