TP-Link TL-WA7510N Factory Defaults, All changed settings will be lost when defaults are restored

Models: TL-WA7510N

1 171
Download 171 pages 6.63 Kb
Page 156
Image 156
5.17.4 Factory Defaults

TL-WA7510N5GHz 150Mbps Outdoor Wireless Access Point User Guide

2.Enter or select the path name where you save the downloaded file on the computer into the File Name blank.

3.Click the Upgrade button.

4.The Device will reboot while the upgrading has been finished.

¾Firmware Version - Displays the current firmware version.

¾Hardware Version - Displays the current hardware version. The hardware version of the upgrade file must accord with the current hardware version.

)Note:

The firmware version must correspond to the hardware. The upgrade process takes a few moments and the Device restarts automatically when the upgrade is complete. It is important to keep power applied during the entire process. Loss of power during the upgrade could damage the Device.

5.17.4 Factory Defaults

Choose menu “System Tools > Factory Defaults”, and you can restore the configurations of the Device to factory defaults on the following screen.

Figure 5-83 Restore Factory Default

Click the Restore button to reset all configuration settings to their default values.

zDefault User Name - admin.

zDefault Password - admin.

zDefault IP Address - 192.168.1.254.

zDefault Subnet Mask - 255.255.255.0.

)Note:

All changed settings will be lost when defaults are restored.

148

Page 156
Image 156
TP-Link manual Factory Defaults, TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide