TP-Link TL-WA7510N manual Configuring AP Router & AP Client Router Mode

TL-WA7510N5GHz 150Mbps Outdoor Wireless Access Point User Guide

Chapter 5 Configuring AP Router & AP Client Router Mode

This chapter will show each Web page's key functions and the configuration way in AP Router mode as well as AP Client Router mode.

)Note:

The setting Web pages of these two modes are mostly the same, with only three differences:

1.In AP Router Mode, there is one more WAN connection type, Big Pond Cable, than that in AP Client Router Mode.（See Section 5.6.2）

2.In AP Client Router Mode, there is one more submenu under Wireless main menu, Antenna Alignment, than that in AP Router Mode, as shown in Figure 5-24& Figure 5-25.(See Section 5.7)

3.The Wireless Settings page in AP Router mode and that in AP Client Router mode are something different, as shown in Figure 5-26& Figure 5-27.(See Section 5.7.1)

5.1 Login

Open your web browser. Type in the default address http://192.168.1.254 in the address field of web browser and then press Enter.

Figure 5-1 Login to the Device

Enter admin for the User Name and Password (both in lower case letters) in Figure 5-2below. Then click OK or press Enter.

Figure 5-2 Login Windows

75