TP-Link TL-WA7510N manual Factory Defaults, The firmware version must correspond to the hardware

Models: TL-WA7510N

1 171
Download 171 pages 6.63 Kb
Page 79
Image 79
1.The firmware version must correspond to the hardware.

TL-WA7510N5GHz 150Mbps Outdoor Wireless Access Point User Guide

2.Enter or select the path name where you save the downloaded file on the computer into the File Name blank.

3.Click the Upgrade button.

4.The Device will reboot while the upgrading has been finished.

)Note:

1.The firmware version must correspond to the hardware.

2.The upgrade process takes a few moments and the Device restarts automatically when the upgrade is complete.

3.It is important to keep power applied during the entire process. Loss of power during the upgrade could damage the Device.

4.9.6 Factory Defaults

Selecting System Tools > Factory Default allows you to restore the factory default settings for the device on the screen shown in Figure 4-41.

Figure 4-41 Restore Factory Defaults

Click the Restore button to reset all configuration settings to their default values.

zDefault User Name - admin.

zDefault Password - admin.

zDefault IP Address - 192.168.1.254.

zDefault Subnet Mask - 255.255.255.0.

)Note:

All changed settings will be lost when defaults are restored.

71

Page 79
Image 79
TP-Link manual Factory Defaults, TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide