TL-WA7510N5GHz 150Mbps Outdoor Wireless Access Point User Guide

Figure 5-53 Advanced Security

)Note:

FLOOD Filtering will take effect only when the Traffic Statistics in System Tools is enabled.

¾Packets Statistics interval (5~60) - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval value indicates the time section of the packets statistic. The result of the statistic used for analysis by ICMP-Flood, UDP Flood and TCP-SYN Flood.

¾DoS Protection - Enable or Disable the DoS protection function. Only when it is enabled, will the flood filters be enabled.

¾Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack Filtering.

¾ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value between 5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value, the Device will start up the blocking function immediately.

¾Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.

¾UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a value between 5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set value, the Device will start up the blocking function immediately.

125

Page 133
Image 133
TP-Link TL-WA7510N manual Advanced Security