Add-on modules / Upgrading
A26361-D1692-Z121-1-7619, Edition 1 23
Installing the Power Supply There are three power connectors on your mainboard D1692.
The mainboard D1692 requires an EPS12V (24-pin + 8-pin) power supply to boot.
You also have an option of using an SSI V3.0 spec. Workstation power supply. This is only
necessary when an AGP PRO110W card is used. (For more information see www.ssiforum.org)
!
NEVER plug the 8-pin power connector into the 6-pin motherboard connector. Doing
so will damage the motherboard and/or other components
Please be aware that ATX 2.x and ATXGES power supplies are not compatible with the board and
can damage the motherboard and/or CPU(s).
Disconnect power supply from electrical outlet
► Connect the EPS12V 8-pin power connector.
► Connect the SSI Workstation 6-pin power connector (if needed).
► Connect the EPS12V 24-pin power connector.
► Connect power cable to power supply to power outlet.
► Make sure you have connected all three connectors before attempting to apply power to the
board.