28D-Link DIR-605L User Manual
Section 3 - Conguration
Check the box to enable the DHCP server on your
router. Uncheck to disable this function.
Enter the starting and ending IP addresses for the
DHCP server’s IP assignment.
Note: If you statically (manually) assign IP addresses to
your computers or devices, make sure the IP addresses
are outside of this range or you may have an IP conict.
The length of time for the IP address lease. Enter the
Lease time in minutes (default setting is 1440).
Displays the name, IP address, MAC Address, and lease
time of devices currently assigned IP settings by the
router.
Check to defend against ARP spoong (ARP poison
routing) attacks to your local network.
Enable DHCP
Server:
DHCP IP
Address Range:
DHCP Lease
Time:
DHCP Client List:
Avoid ARP
Attack:

DHCP Server Settings

DHCP stands for Dynamic Host Control Protocol. The DHCP
Server (built-in to the router) will automatically assign an IP
address to the computers and devices on your network. Be
sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.”
When you turn your computers on, they will automatically
load the proper TCP/IP settings provided by the DIR-605L.
The DHCP Server will automatically allocate an unused
IP address from the IP address pool to the requesting
computer. You must specify the starting and ending address
of the IP address pool.