33D-Link DIR-605L User Manual
Section 3 - Conguration
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
These applications may have diculties working through NAT (Network Address Translation). Special Applications makes
some of these applications work with the DIR-605L. If you need to run applications that require multiple connections, specify
the port normally associated with an application in the “Trigger” eld, select the protocol type as TCP or UDP, then enter the
rewall (public) ports associated with the trigger port to open them for inbound trac.
The DIR-605L provides some predened applications in the table on the bottom of the web page. Select the application you
want to use and enable it.
Check the box to enable the rule.
Enter a name for the rule.
You may select a pre-dened rule from the drop-down
menu. Select and click << to populate the required
elds.
This is the port used to trigger the application. It can
be either a single port or a range of ports.
This is the port number on the Internet side that will
be used to access the application. You may dene a
single port or a range of ports. You can use a comma
to add multiple ports or port ranges.
Select TCP, UDP, or Any.
Enable:
Name:
Application:
Trigger:
Firewall:
Trac Type: