Add-on modules / Upgrading
A26361-D1692-Z121-1-7619, Edition 1 15
Add-on modules / Upgrading Installing the Processor(s)
The mainboard D1692 supports the latest 64-bit processor technologies from AMD. Only AMD
Opteron™ processor 200 series are certified and supported with this motherboard.
i
If using a single processor, it MUST be installed in socket CPU0. When using a si ngle
processor only CPU0 memory banks are addressable.
There must be used identical processors for CPU0 and CPU1.
Fujitsu Siemens Computers is not liable for damage as a result of operating an unsupported
configuration.
The diagram is provided as a visual guide to help you install socket processors and may not be an
exact representation of the processors you have.
► Lift the lever on the socket until it is approximately 90o or as far back as possible to the soc ket.
► Align the processor with the socket. There are keyed pins underneath the processor to ensure
that the processor is installed correctly.
► Seat the processor firmly into the socket by gently pressing down until the processor sits f lush
with the socket.
► Place the socket lever back down until it locks into place.
Your processor is installed.
Repeat these steps for the second processor if you are using two processors.