TP-Link TL-WA7510N manual Standard AP Mode

TL-WA7510N

5GHz 150Mbps Outdoor Wireless Access Point User Guide

Figure 3-10 Choose Operation Mode

¾Standard AP: In this mode, the device enables multi-users to access, and provides several wireless modes. such as AP, Client, Repeater and so on

¾AP Router: In this mode, the device enables multi-users to share Internet via ADSL/Cable Modem. The wireless port share the same IP to ISP through Ethernet WAN port. The Wireless port acts the same as a LAN port while in AP Router mode.

¾AP Client Router: In this mode, the device enables multi-users to share Internet from WISP. The LAN port devices share the same IP from WISP through Wireless port. While connecting to WISP, the Wireless port works as a WAN port in AP Client Router mode. The Ethernet port acts as a LAN port.

3.2.1 Standard AP Mode

When you choose Standard AP Mode on Operation Mode page in Figure 3-10,take the following steps:

1.Click Next in Figure 3-10,and then Wireless page will appear as shown in Figure 3-11.

16