TP-Link manual TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide

Models: TL-WA7510N

1 171
Download 171 pages 6.63 Kb
Page 164
Image 164
3.If I want to use Net meeting, what do I need to do?

TL-WA7510N5GHz 150Mbps Outdoor Wireless Access Point User Guide

2.How do I configure the Device to access the Internet by Ethernet users?

1)Login to the Device, click the “Network” menu on the left of your browser, and click "WAN" submenu. On the WAN page, select “Dynamic IP” for "WAN Connection Type", finish by clicking “Save”.

2)Some ISPs require that you register the MAC Address of your adapter, which is connected to your cable/DSL Modem during installation. If your ISP requires MAC register, login to the Device and click the "Network" menu link on the left of your browser, and then click "MAC Clone" submenu link. On the "MAC Clone" page, if your PC’s MAC address is proper MAC address, click the "Clone MAC Address" button and your PC’s MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address into the "WAN MAC Address" field. The format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click the "Save" button. It will take effect after rebooting.

Figure A-3 MAC Clone

3.If I want to use Net meeting, what do I need to do?

1)If you start Net meeting as a sponsor, you don’t need to do anything with the Device.

2)If you start as a response, you need to configure Virtual Server or DMZ Host.

3)How to configure Virtual Server: Login to the Device, click the “Forwarding” menu on the left of

your browser, and click "Virtual Servers" submenu. On the "Virtual Server" page, click Add New, then on the “Add or Modify a Virtual Server” page, enter “1720” into the blank behind the “Service Port”, and your IP address behind the IP Address, assuming 192.168.1.169 for an example, remember to “Enable” and “Save”.

Figure A-4 Virtual Servers

156

Page 164
Image 164
TP-Link manual TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide