TP-Link manual TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide

TL-WA7510N5GHz 150Mbps Outdoor Wireless Access Point User Guide

)Note:

There are differences between the Wireless Settings page in AP Router mode and that in AP Client Router mode, as shown in Figure 5-26& Figure 5-27.

1. Wireless settings in AP Router mode

Figure 5-26 Wireless Settings in AP Router mode

¾Wireless Radio- Enable or disable the wireless radio.

¾SSID- Enter a string of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_xxxxxx(xxxxxx indicates the last unique six characters of each Device's MAC address), which can ensure your wireless network security. But it is recommended strongly that you change your networks name (SSID) to a different value. This value is case-sensitive. For example, MYSSID is NOT the same as MySsid.

¾Region- Select your region from the pull-down list. This field specifies the region where the

wireless function of the Device can be used. It may be illegal to use the wireless function of the Device in a region other than one of those specified in this filed. If your country or region is not listed, please contact your local government agency for assistance.

¾Channel- This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. If you select auto, then the Device will select the best channel automatically.

¾Mode- This field determines the wireless mode which the Device works on.

¾Max Tx Rate- You can limit the maximum tx rate of the Device through this field. You can select one of security options listed as the below items.

98