TP-Link manual TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide

Models: TL-WA7510N

1 171
Download 171 pages 6.63 Kb
Page 99
Image 99
Manual background

TL-WA7510N5GHz 150Mbps Outdoor Wireless Access Point User Guide

Figure 5-19 PPPoE Advanced Settings

zMTU Size - The default MTU (Maximum Transmission Unit) size is 1480 bytes, which is usually fine. For some ISPs, you need modify the MTU. This should not be done unless you are sure it is necessary for your ISP.

zService Name/AC Name - They should not be done unless you are sure it is necessary for your ISP.

zISP Specified IP Address - If you know that your ISP does not automatically transmit IP address to the Device during login, click "Use the IP Address specified by ISP" checkbutton and enter the IP address in dotted-decimal notation, which is provided by your ISP.

zDetect Online Interval - The default value is 0. You can input the value between 0 and 120. The Device will detect Access Concentrator online every interval seconds. If the value is 0, it means not detecting.

zUse the following DNS Servers - If your ISP specifies a DNS server IP address for you, click the checkbox, and fill the Primary DNS and Secondary DNS blanks below. The Secondary DNS is optional. Otherwise, the DNS servers will be assigned dynamically from ISP.

zPrimary DNS - (Optional) Enter the DNS IP address in dotted-decimal notation provided by your ISP.

zSecondary DNS - (Optional) Enter another DNS IP address in dotted-decimal notation provided by your ISP.

)Note:

The new advanced PPPoE parameters will not take effect until you dial-up again.

Click the Save button to save your settings.

Click the Back button when finished.

91

Page 99
Image 99
TP-Link manual TL-WA7510N 5GHz 150Mbps Outdoor Wireless Access Point User Guide