the Device in a region other than one of those specified in this filed. If your country or region is not listed, please contact your local government agency for assistance.
¾Search - Click this button, you can search the AP which runs in the current channel.
¾Key type - This option should be chosen according to the AP's security configuration. It is recommended that the security type is the same as your AP's security type.
¾WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the index of the WEP key.
¾Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the authorization type of the Root AP.
¾Password - If the AP your Device is going to connect needs password, you need to fill the password in this blank.
¾Local SSID - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network.
¾Enable Wireless Router Radio - The wireless radio of the Device can be enabled or disabled to allow wireless stations access. If enabled, the wireless stations will be able to access the Device; otherwise, wireless stations will not be able to access the Device.
¾Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the wireless Router will broadcast its name (SSID) on the air.
¾Disable Local Wireless Access - If you select the Disable Local Wireless Access checkbox, the wireless Device will disable local wireless access; other stations will not be able to access the Device by wireless.
Click Search button on the Wireless page shown as Figure
