TP-Link TL-WA7510N manual 5GHz 150Mbps Outdoor Wireless Access Point User Guide

TL-WA7510N

5GHz 150Mbps Outdoor Wireless Access Point User Guide

¾User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive.

¾Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP’s IP address or the domain name.

zIf you choose static IP and enter the domain name, you should also enter the DNS assigned by your ISP. And click the Save button.

zClick the Connect button to connect immediately. Click the Disconnect button to disconnect immediately.

¾Connect on Demand - You can configure the Device to disconnect from your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Device to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, check the radio button. If you want your Internet connection to remain active at all times, enter “0” in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates.

¾Connect Automatically - Connect automatically after the Device is disconnected. To use this option, check the radio button.

¾Connect Manually - You can configure the Device to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the Device will disconnect from your Internet connection, and you will not be able to re-establish your connection automatically as soon as you attempt to access the Internet again. To use this option, click the radio button. If you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have the Internet connecting last unless a new link is requested.

)Note:

Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time because some applications are visiting the Internet continually in the background.

Click the Save button to save your settings.

6.If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable option. And then you should enter the following parameters as in Figure 5-22.

)Note:

This type of WAN Connection is only available in AP Router mode, but not in AP Client Router Mode.

94