
3.Select the Enabled in the Status
4.Click the Save button to save the changes.
¾To modify or delete an existing entry:
1.Find the desired entry in the table.
2.Click Modify or Delete as desired on the Modify column.
Click the Enable All button to enable all entries.
Click the Disable All button to disable all entries.
Click the Delete All button to delete all entries.
5.14 Bandwidth Control
Figure 5-69 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 5-69: Control Settings and Rules List. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.
5.14.1Control Settings
Choose menu “Bandwidth Control > Control Settings”, and then you can configure the Egress Bandwidth and Ingress Bandwidth in the next screen (shown in Figure
Figure 5-70 Bandwidth Control Settings
137