MidiLand Complete Setup Guide for Speakers - Enhance Your Audio Experience

SETUP

1 Check your S4 MidiLand™ 7100 package for the following items:

lFive (5) Satellite Speakers.

lOne (1) Subwoofer with integrated 100W RMS power amplifier. l One (1) CM-7 Control Module.

l One (1) 10 Feet, 9-Pin to 9-Pin Interface Cable (subwoofer to CM-7 control module). l Two (2) 6 Feet and 8 inches, high performance Wire Speaker Cables.

l Two (2) 16 Feet, rear channel high performance Speaker Cables. l Three (3) 10 Feet, Dual RCA to Dual RCA Audio Cable .

l Two (2) 1.5 Feet, 3.5mm Stereo Mini Jack to RCA Female Audio Cable.

l TWo (2) 1.5 Feet, 3.5mm Mono Mini Jack to RCA Mono Female Audio Cable. l One (1) 2’ 9-pin to 9-pin flat Ribbon Cable with separate metal Slot Cover.

l Eight (8) non-marring, self-adhesive Rubber Feet.

l One (1) 4” self-adhesive control module Mounting Strips.

lFour (4) Self-threading Screws for internal mounting of control module. l One (1) Power Transformer.

Your packaging may also contain other printed material with special offers for direct purchase of related multimedia products as well as optional MidiLand™ accessories.

2	Prepare the area where you will be installing your multimedia system.
	Following are some tips you might want to consider:

•Select a location for the satellite speakers which is solid and places them an appropriate distance apart for good stereo imaging (2-3’ apart if using on a desktop with your multimedia computer, personal stereo or mini-bookshelf audio system; at least 3-4’ apart if using fairly close to a television set with your set top video game and at least 6’-8” apart if using them in a home theater or traditional audio setup (i.e., when listening from across the room).

•Featuring a dual angle elipsoidal design, the satellite speakers may be used in either of two (2) “tilt” angles simply by turning the unit “upside-down”. The angle can be 15° or 25° to help raise the stereo image and improve focus and clarity. The satellite speakers may also be wall mounted with optional bracket available separately from your dealer.

•Select a solid location for the subwoofer (generally on the floor) which allows adequate ventilation for the 60W RMS Integrated Amplifier mounted in the rear of the subwoofer enclosure. To enhance bass performance, it is generally advisable to place the subwoofer next to a wall or solid piece of furniture with the woofer/grille side pointing away from the wall or furniture. You’ll probably want to experiment with several different locations once you’ve completed the installation and hookup. Place 4 Rubber Feet under subwoofer to protect the mounting surface, if necessary.

•If you choose to mount the control module internal to a computer, refer to illustration I-1. However, if you choose to mount the control module externally (i.e. the underside of your desktop, underneath your monitor, on top of your desktop, etc.), we have supplied self-adhesive mounting strips or 4 Rubber Feet to secure/place the controls wherever it is most convenient.

3