HOW TO USE
4
5
After verifying that everything has been connected properly, plug the power cord into an available AC wall outlet. On the control module, set the controls as follows:
lTurn on the system with the POWER button.
lRotate the Volume control fully couterclockwise.
lPress the Mute buttons so that they are in the out position, not “engaged”.
lTurn the Bass, Fade,Treble, and Balance to the center detent position, “12 o’clock”.
To start making music, adjust the controls as follows:
lStart your music,
l Adjust the Balance control left and right to audibly check your connections.
l Rotate the Bass and Treble left and right. You should noticably hear an increase or decrease in tone. l Rotate the Fade control left and right to adjust front and rear sound separation.
l Make sure to experiment with all of the controls to customize the sound just the way you like it. If you have a question, look in to the Troubleshooting page.
l For further support
8
