Philips PPC927C1, PPC932C1, PA9032C1, PA9019C1 Place the TV/VCR/ACC, Point the remote control at

	SETTING THE REMOTE CONTROL TO WORK WITH OTHER DEVICES
	our remote control is set to
	Ywork your TV and many
	infrared remote (IR) control
	VCRs, Cable Boxes, Satellite
	Systems, DBS, DVD, etc.
	However, an easy onetime step
	may be necessary before the			SLEEP
	remote will work your accessory.
		1
	Try this initial check to see if			A/CH		STATUS/EXIT		CC
	going on to the following section
	is necessary.		TV	RECORD
	BEGIN		VCR		1		2	3
1	Place the TV/VCR/ACC
		VCR
	Mode Switch in the proper posi-		ACC		4		5
	tion.
2 Point the remote control at
					7		8
	the device and press the POWER
	button.
3 Does the remote turn the					SMART		0
	device ON?				SOUND
	If YES, stop and try other func-	Satellite Receiver
	tion buttons on the remote. If				POWER			2
	they also work the device, then		SLEEP			CLOCK
					CC
	the remote is ready and no fur-			A/CH	STATUS/EXIT	TV/VCR
				RECORD
				TV
	ther steps are needed.			VCR
					ACC		SMART
		Cable Converter				SMART	PICTURE
	If NO, continue...					SOUND	SURF
						MENU
								CH
							VOL	MUTE
1	First look up a THREE-DIGIT
	remote control number for your
	brand of Device before going
	through the simple steps on the
	following page.
	Find your Accessory Device
	Three-Digit Codes listed on
	pages 28-29.
	SMART HELP
	Remember, if more than
	one number is listed, you may
	have to try more than the first Three-
	Digit code given in order to locate
	your Device’s proper remote code.
		25