Multitech MT5600BA Connect the Modem to Your System, Connect the Modem to Your PC, Installation

Chapter 2 - Installation

Chapter 2 - Installation

Step 1 - Connect the Modem to Your System

Turn off your computer. Placing the modem in a convenient location, connect it to your computer’s serial port, to the telephone line, to your leased line, to AC power, and, optionally, to your telephone.

PHONE LINE LEASED EIA RS232C

VOLUME	POWER
	or

MultiModemII connections with V.92 transformer and V.90 transformer.

Connect the Modem to Your PC

Plug one end of the serial cable into the RS-232 connector on the modem, and the other end into a serial port connector on your computer, such as COM1 or COM2.

Connect the Modem to the Telephone Line (Dialup Connection)

Plug one end of the modular phone cable into the modem’s LINE jack, and the other end into a public switched telephone network (PSTN) wall jack.

Important: The LINE jack is not interchangeable with the PHONE jack. Do not plug the phone into the LINE jack or the line cable into the PHONE jack.

Note: Regulatory agencies may impose certain restrictions on equipment connected to public telephone systems.

Connect theTwo-Wire Leased Line

MT5600BA – Plug one end of a two-wire phone cable into the modem’s LINE jack; connect the other end to a leased line wall jack or terminals.

MT5600BL – Plug one end of a two-wire phone cable into the modem’s LEASED jack; connect the other end to a leased line wall jack or terminals.

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E) 7