Cooper Lighting H456ICAT120D Lutron Leviton, Cooper Controls, Cooper Wiring Devices, Watt Stopper

Standard Dimming Control

H 4 5 6 I C AT 1 2 0 D

120V AC Power

(2 wire + Gnd typical)

120V AC dimmed power to Halo LED Downlights

Dimmer Types & Representative List of Manufacturers*

Reverse Phase Control - 120VAC Dimmers

•Electronic Low Voltage rated dimmers are typically Reverse Phase (Trailing Edge)

•ELV rated dimmers provide greater assurance of dimming performance compatibility.*

•Minimum Circuit Load of One LED Module, Dimming to 15% (dimming to 5% with select dimmers as noted)

Require the neutral terminal on the dimmer connected to a neutral in the wall box.

Lutron		Leviton
Diva®	DVELV Series	Minimum Brightness Adjustment (Low End Trim), Dimming to 5%
Maestro®	MAELV Series	Acenti®	ACE Series (Programmable trim)
Nova®	NLV Series	IllumiTech™	IPE Series (Manual trim)
Nova T®	NTELV & NTLV Series	Vizia +	VPE Series (Programmable trim)
Skylark®	SELV Series
Vierti®	VTELV Series

Forward Phase Control Dimmers - 120VAC

•Incandescent and Magnetic Low Voltage rated dimmers are typiccally Forward Phase (Leading Edge) Dimmers

•Circuit Load of 4 LED Modules or More, Dimming to 15%

•Forward phase control dimmers are generally compatible and typically provide acceptable dimming results.*

Cooper Controls

iLumin SC-UN Universal Source Controller Series - Lighting Control Panel System

Cooper Wiring Devices

ASPIRE RF®	N/A
ASPIRE™	9530, 9532, 9538, 9540
Decorator Slide®	DI06P, DI10P
Decorator Full-Slide®	SI061, SI06P, SI10P
Toggle®	6441, 6443, 6453
Rotary®	6001, 6013, 6000, 6003, 6020, 6023
Architectural Rotary®	RAI10, RAI15, RAI20

Cooper Wiring Devices - LED Dimmers (Low End Trim)

ASPIRE	9573
Skye	SLC03P
Devine	DLC03P

Lutron

Ariadni®	AY/TG Series	Lumea™	LG Series
Ceana™	CN Series	Lyneo™	LX Series
Centurion®	C Series	Nova®	N Series
Dalia™	DL Series	Nova T®	NT/NTB/NTA Series
Diva®	DV Series	Qoto™	Q Series
Glyder®	GL Series	Skylark®	S Series

Leviton

Illumitech™		IPI/RPI Series	Trimatron™		6681/6683/6602
Sureslide™		663 Series		TrueTouch™	6606-ILM
	Minimum Brightness Adjustment (Low End Trim), Dimming to 5%
Illumitech™		IP10/IP40/IPM406/IPM10 Series dimmers (Manual trim)
Acenti®		ACI/ACE/ACX/ATI Series (Programmable trim)
Vizia +		VPI/VPE/VPX Series (Programmable trim)

Lutron - Commerical

Commercial Panel Systems LP-RPM-4A120 Remote Power Module - Adaptive Dimming

Lutron - Whole House

Homeworks HW-RPM-4A-120 Remote Power Module-Adaptive Dimming

HW-RPM-4V-120 Remote Power Module-Dimming

HWD-5NE, HRD-5NE Wired Maestro and RF Maestro Local Controls

Watt Stopper

Miro Universal DRD4 Series Dimmers

DCD267 Series Dimmers

DCD68 Series Multilocation - When used with DRD4 or DCD267 series master dimmers

•Universal Wireless Dimmers (Incandescent, Magnetic Low Voltage, Electronic Low Voltage)

•Minimum Circuit Load of Two LED Modules, Dimming to 15%

Watt Stopper

Miro Incandescent	DRD2 Series Dimmers
	DCD26 Series Dimmers
	DCD68 Series Multilocation - When used with DRD2 or DCD26
	series master dimmers

•Incandescent Wireless Dimmers

•Minimum Circuit Load of Five LED Modules, Dimming to 15%

A 15W minimum incandescent load or a neutral in the wall box may be required to reliably dim

LiteTouch, Inc.

LiteTouch 08-2108-01	Quad dimmer
LiteTouch 08-2134-01	Hybrid dimmer

(LiteTouch recommends the fade times be set for at least 2 seconds on and off for the FIVEk in the load group parameters. Consult LiteTouch for additional technical application).

Crestron*

CLS-C6(M), CLS-EXP-DIM, CLS-EXP-DIMU, CLX-1DIM4, CLX-1DIM8, CLX-2DIM8, CLX-1DELV4, DIN-1DIM4, DIN-1DIMU4, GLX-DIM6, GLXX-2DIM8 (Crestron recommends if more than 1 fixture is connected, set MIN LEVEL=3% to ensure all fixtures turn on simultaneously at low end).

CLW-DIMSWEX, CLW-DIMSWCN, CLW-DIMEX, CLW-DIMCN, P-DIMEX (Consult Crestron for LED compatibilty and technical application. Require Neutral wire connection at dimmer and custom firmware).

*Consult Crestron for Control System Min-Max % level Intensity recommendations.

*Applications Notes

1.LED Dimming performance may vary from incandescent dimming. Performance results may vary based upon dimmer model, manufacturer, circuit wiring and circuit loading.

2.Dimmer maximum load rating with LED may differ from published Incandescent and Electronic Low Voltage dimmer ratings. Consult dimmer manufacturer for maximum dimmer load with LED.

3.For special dimming applications consult dimmer manufacturer or controls specialist (e.g. large multiple circuit installations, many LEDs per circuit, sequenced fades, 277V or 347V circuits powered by step-down transformers, etc.).

4.There are no warranties of performance or compatibilty implied.

5.This is a representative list of dimmers. Refer to dimmer manufacturers for further information on LED compatiblity and finish codes.

Lutron, Leviton, LiteTouch, Crestron, Watt Stopper and their product brand names are registered trademarks of each respective company.

SPECIAL NOTE: Incandescent Digital Dimmers

Incandescent Digital Dimmers (also called Smart or Multi-Location) require an incandescent load. For circuit loads with LED modules only - use reverse phase control (electronic low voltage rated) dimmers.

www.cooperlighting.com