If you want to create a configuration for an MLC that is not connected to your computer, select the Emulation Mode tab and see “Using emulation mode” on page 5-43.

3. From the “Select a COM port” drop box, select the port through which your computer will communicate with the MLC (information on the communications port to use should be available from your system administrator).

Mode selection window, Select a Comm Port tab

4. Click OK. The following screen appears:

Model selection screen

5. Click on the graphic representation of the connected MLC 52 model (standard or VC). (When you subsequently open the MLC 52 configuration program, the software detects and displays the model that you originally specified, and you do not see this screen again.)

MLC 52 Series MediaLink Controllers • Serial Communication 5-21

Page 81
Image 81
Extron electronic MLC 52 manual Mode selection window, Select a Comm Port tab, Model selection screen