Extron electronic MLC 52 manual Using the Video button S-video or composite video

Issuing input selection commands learned from remote control type B

The MLC now has two commands each on the PC and Video buttons. When you press an MLC input button repeatedly, the following commands are issued:

Using the PC button (RGB):

•First press (memory block #1): The MLC 52 issues command “A” for RGB input selection.

•Second press (memory block #2): The MLC 52 issues command “B” for RGB input selection.

Using the VIDEO button (S-video or composite video):

•First press (memory block #1): The MLC 52 issues command “A” for composite video input selection.

•Second press (memory block #2): The MLC 52 issues command “B” for S-video input selection.

Programming VC models — Projector remote control type B

If you are using a type B remote control with an MLC 52 IR VC or an MLC 52 RS VC, configure the buttons according to the diagram below.

VOLUME

Leave blank and do not program. The button should be in single switch mode.

Leave blank and do not program. The button should be in single switch mode.

DISPLAY

ON OFF

VCR PC

DVD

Command #1: Computer IR Command“A”

Command #2: Computer IR Command“B”

Command #1: Video 1 IR Command“A”

Command #2: Video 2 IR Command“B” Label the button accordingly and place it in input switch mode.

COMPUTER		VIDEO
VIDEO	AUDIO	A/V
MUTE	MUTE	MUTE
MENU		ENTER

CONT/ COL/

SIZE CENTER BRT TINT

SHARP	PHASE	ASPECT
		RATIO

MLC 52

Projector Remote Type B

Programming an MLC 52 VC model with a projector remote control type B

MLC 52 Series MediaLink Controllers • Special Applications 4-15