Extron electronic manual Key to file names, Configuring using the MLC 52 Configuration Wizard

Browse For Folder window

5. Click OK on the IR Driver Directory.

Key to file names

File name	Description
________.MLL	Extron-supplied display device driver library files. These files
	contain commands and settings pertinent to a particular
	projector or display.
________.MLK	User-saved MLC/MLC-MLS/MLS configuration files. This
	includes adjustments/settings and whatever driver (if any) was
	installed in the MLC at the time the file was saved.
________.EIR	IP Link IR drivers (which can also be used by the MLCs)

Configuring using the MLC 52 Configuration Wizard

The MLC 52 Configuration Wizard is a program that helps you perform basic configuration of the MLC 52. You can use the wizard to create a new configuration or to open and upload an existing one that you can then edit using the Windows-based configuration software. You can configure an MLC that is connected to your PC, or you can configure an MLC 52 (or a DVCM 50) that is not connected (by using emulation mode). For information on performing a complete configuration of your MLC, see “Configuring using the Windows-based configuration program” on page 5-19.

If you have an RS model of the MLC 52 or the MLC 52 VC, the wizard allows you to configure the MLC with a serial driver only. If you want to create a configuration with additional IR drivers, you must access the Windows-based configuration software directly.

If your MLC is an IR model, the wizard lets you load only an IR driver.

MLC 52 Series MediaLink Controllers • Serial Communication 5-9