Extron electronic MLC 52 manual Display

b. Within 5 seconds (while the Video or blank button on the MLC 52 is blinking), press the S-video button on the projector’s remote control. The MLC has learned command “A” for S-video.

4. Program the input selection command “B” from the Video input selection button on the projector’s remote control into memory block #3 of the MLC 52’s Video button as follows:

a. Press the Video button on the MLC front panel. The button blinks, indicating that the MLC is ready to learn the command. On the rear panel, the third LED from the bottom flashes.

b. Within 5 seconds (while the Video or blank button on the MLC 52 is blinking), press the Video button on the projector’s remote control. The MLC has learned command “B” for Video.

5. Program the input selection command “B” from the S-video input selection button on the projector’s hand-held remote control into memory block #4 of the MLC 52’s Video button as follows:

a. Press the Video button on the MLC front panel. The button blinks, indicating that the MLC is ready to learn the command. On the rear panel, the fourth LED from the bottom flashes.

b. Within 5 seconds (while the Video or blank button on the MLC 52 is blinking), press the S-video button on the projector’s remote control. The MLC has learned command “B” for S-video.

6. When finished programming the MLC 52’s buttons, return configuration switch #1 to its Off (down) position.

7. Test the system.

	DISPLAY
ON	OFF
VOL	PC
VOL	VIDEO

Command #1 : RGB 1 / IR Command “A”

Command #2 : RGB 2 / IR Command “A”

Command #3 : RGB 1 / IR Command “B”

Command #4 : RGB 2 / IR Command “B”

Command #1 : Video / IR Command “A”

Command #2 : S-video / IR Command “A”

Command #3 : Video / IR Command “B”

Command #4 : S-video / IR Command “B”

		INPUTS
S-Video	RGB1
VIDEO		RGB2
SET		POWER
UP	PRG+
	PLAY	UP
TIME/		TIME/
LEVEL– DLY/CNT/REAR		LEVEL+
REW	PAUSE	FF
LEFT		RIGHT

STOP DOWN

PRG–

–+

SKIP/CHAPTER

TV	DIR A	DECK	DIR
		A/B		B
INPUT
		+100
EFFECT	REC/	SLEEP	TV
	PAUSE			E
ON/OFF			MUT

INPUT SELECT

CD TAPE TUNER

1 2 3

PHONO DVD/LD VCR

4 5 6

TV/DBS

MLC 52

7 8 9

ENT 0 DISP

TEST

Projector Remote Type A

Programming MLC 52 input selection buttons from a projector remote control type A

MLC 52 Series MediaLink Controllers • Special Applications 4-11