Extron electronic MLC 52 manual Using the PC button RGB

Special Applications, cont’d

Issuing input selection commands learned from a type A remote control

The MLC now has four commands each on the PC and Video buttons. When you press an MLC input button repeatedly, the following occurs:

Using the PC button (RGB):

•First press (memory block #1): The MLC 52 issues command “A” for RGB 1 input selection. The projector switches to its RGB 1 input.

•Second press (memory block #2): The MLC 52 issues command “A” for RGB 2 input selection. The projector switches to its RGB 2 input.

•Third press (memory block #3): The MLC 52 issues command “B” for RGB 1 input selection. The projector switches to its RGB 1 input.

•Fourth press (memory block #4): The MLC 52 issues command “B” for RGB 2 input selection. The projector switches to its RGB 2 input.

Using the Video button (S-video or composite video):

•First press (memory block #1): composite video input selection.

The MLC 52 issues command “A” for The projector switches to its video input.

•Second press (memory block #2): The MLC 52 issues command “A” for S-video input selection. The projector switches to its S-video input.

•First press (memory block #1): composite video input selection.

The MLC 52 issues command “B” for The projector switches to its video input.

•Second press (memory block #2): The MLC 52 issues command “B” for S-video input selection. The projector switches to its S-video input.

Programming VC models — projector remote control type A

If you are using an MLC 52 IR VC or an MLC 52 RS VC with a type A remote control, program the buttons as indicated in the illustration below.

		DISPLAY
VOLUME	ON	OFF
Command #1: Video 1 IR Command“A”	VCR	PC
Command #2: Video 1 IR Command“B”
Command #1: S-video 2 IR Command“A”	DVD
Command #2: S-video 2 IR Command“B”
		MLC 52

Command #1: RGB 1 IR Command“A”

Command #2: RGB 1 IR Command“B”

Optional:

Command #1: RGB 2 IR Command“A”

Command #2: RGB 2 IR Command“B” Label the button button accordingly and place it in input switch mode.

		INPUTS
S-Video	RGB1
VIDEO		RGB2
SET		POWER
UP	PRG+
	PLAY	UP
TIME/		TIME/
LEVEL– DLY/CNT/REAR		LEVEL+
REW	PAUSE	FF
LEFT		RIGHT

STOP DOWN

PRG–

–+

SKIP/CHAPTER

TV	DIR A	DECK	DIR B
		A/B
INPUT
		+100
EFFECT	REC/	SLEEP	TV
	PAUSE
ON/OFF			MUTE

INPUT SELECT

CD TAPE TUNER

1 2 3

PHONO DVD/LD VCR

4 5 6

TV/DBS

7 8 9

ENT 0 DISP

TEST

Projector Remote Type A

Programming an MLC 52 VC model with a projector remote control type A

4-12 MLC 52 Series MediaLink Controllers • Special Applications