Wall Stud

Installation

Cable

Cable Clamp

Screws or Nails

Wall opening flush with edge of box

Attaching a wall box to a wall stud

If you are attaching the wall box to wood, use four #8 or #10 screws or 10-penny nails. A minimum of ½ inch (1.3 cm) of screw threads must penetrate the wood.

If you are attaching the wall box to metal studs or furniture, use four #8 or #10 self-tapping sheet metal screws or machine bolts with matching nuts.

If you are using a mounting bracket (mud ring) with the wall box, follow the directions included with the bracket to attach the clips that fasten the bracket to the wall or furniture.

8.If desired, replace the faceplate and/or button labels on the MLC. (See “Replacing the Faceplate and Button Labels,” earlier in this chapter.)

9.Cable and test the MLC before fastening it into the wall box, mounting bracket, or furniture.

MLC 52 Series MediaLink Controllers • Installation

2-7

Page 17
Image 17
Extron electronic MLC 52 manual Attaching a wall box to a wall stud