![](/images/new-backgrounds/1108587/108587417x1.webp)
Hardware Installation
4.9.1WLAP mode LED display.
When in the WLAP mode the chart below signifies the APs LED indicator status.
For the IEEE 802.11 protocol and APs using firmware version
1. After power up, system initialization begins:
LED | State |
Power | On |
Wired LAN Activity | Off |
Wireless LAN Activity | Blinks slowly |
2. When a WLAP begins a full scan: | |
LED | State |
Power | On |
Wired LAN Activity | Off |
Wireless LAN Activity | Blinks slowly |
3. When one or more WLAPs are found, but still in full scan state:
LED | State |
Power | On |
Wired LAN Activity | Off |
Wireless LAN Activity | Blinks slowly |
4.When the WLAP is in functional state, but one or more WLAP connections are not in Forward state:
LED | State |
Power | Blinks regularly |
Wired LAN Activity | Blinks if activity occurs |
Wireless LAN Activity | Blinks slowly |
199 |