Symbol Technologies AP-4131 manual Entering Admin Mode

Configuring the AP

Administration screens include options for saving or clearing data that appear on the bottom line of the screen. Confirmation prompts include the following:

OK	Registers settings but does not save them in NVM
	(nonvolatile memory). A reset command returns to
	previously saved settings.
Save	Saves all settings (including ones not on that screen) to
	NVM. This is the same as Save Configuration in the Special
	Functions screen.

Save ALL APs Saves the AP installation configuration information to all APs

	with the same Net_ID (ESS). This option saves the
	configuration changes for the current AP on the Known APs
	table to update their configuration and reset after the
	configuration has been modified. Users can perform this
	option only among the same hardware platforms and same
	firmware versions.
Cancel	Does not register settings changed in a screen.

2.2.1Entering Admin Mode

The UI defaults to User when in Serial mode allowing read-only access to the APs functions (e.g., view statistics). Entering Admin mode provides access to configuration menus and allows the user to configure the AP.

Entering Admin mode requires the administration password.

1.Select Enter Admin Mode from the Main Menu. The AP prompts for the administration password:

Enter System Password:

2. Type the default password:

Symbol

The password is case-sensitive.

50 AP-4131 Access Point Product Reference Guide