Symbol Technologies AP-4131 manual 138

Configuring the AP

2.Set Any Event Logging to Enabled to log all events. Specify the events that do not require logging when disabling Any Event Logging. Use SPACE BAR or LEFT/RIGHT-ARROW keys to toggle between Enabled and Disabled.

Any Event	Logs all events listed in the screen.
Logging
Security	ACL filter, administrative password access
Violations	violations or Kerberos errors.
MU State	Allows logging all MU state changes.
Changes
WNMP Events	WNMP events such as MUs using WNMP.
AP-AP Msgs	AP to AP communication.
Telnet Logins	Telnet sessions for monitoring and administration.
System Events	Internal use only.
Ethernet Events	Events such as packet transmissions and errors.

3.Verify the values reflect the network environment. Change them as needed.

4.Select OK or Save to register settings by writing changes to NVM. Selecting Save displays a confirmation prompt.

5.Select Save ALL APs or press [F2] to save the Event Logging Configuration information to all APs with the same Net_ID (ESS).

This option saves the configuration changes for the current AP, sends two WNMP messages to all other APs on the Known APs table to update their configuration and resets once modified. Users can perform this option only among the same hardware platforms and firmware version.

6.The system prompts Warning Update, save, and reset all APs in the Known AP Menu?

yes no Type Y.

7.Select Cancel-[ESC]to disregard any changes made to this screen and return to the previous menu.

138 AP-4131 Access Point Product Reference Guide