Configuring the AP
1.To access and enable the Kerberos configuration, select Configure Kerberos from the Special Functions Menu. The Configure Kerberos Authentication screen displays:
Symbol Access Point |
|
| Configure Kerberos Authentication |
Kerberos | Enabled |
KSS Port | 34567 |
KSS Secret | ******* |
KSS Name/IP Address | ksssrv |
*** If not using a KSS, please configure the following items.
KDC Server Name/IP Address | krbtgt |
Backup KDC Name/IP Address | kdc2 |
Realm Name | APFW.SYMBOL.COM |
User ID | ap3 |
Password | ******* |
OK-[CR] Save-[F1] Cancel-[ESC]
Enable Kerberos
2.Verify the KSS port/name to enable Kerberos. Modify as needed.
3.Verify the KDC name.
Only enter a KDC Server Name/IP Address, Backup KDC Name/IP Address, Realm Name, User ID
and Password if not using a KSS.
The MU does not display the Kerberos login password screen if the wrong KDC name is entered in the AP Authentication screen.
4. Verify the User ID matches the ESSID.
95 |
