Configuring the AP
9.Press ENTER.
10.Select Save-[F1] to save settings.
11.Select Special Functions from the Main Menu.
12.Press F3 to view the Firmware Update Menu.
Symbol Access Point |
|
|
| |
| Firmware Update Menu |
| ||
Use TFTP to update Access Point’s: |
| |||
Firmware | HTML file | Firmware and HTML File | Config | |
Use XMODEM to update Access Point’s: |
| |||
Firmware | HTML file | Firmware and HTML File | Config | |
Use TFTP to update ALL Access Points’: |
| |||
Firmware | HTML file |
|
| |
Alter Filename(s)/HELP URL/TFTP Server |
| |||
.Firmware Filename dsap3_fw.bin |
| |||
.HTML Filename | dsapt3htm.bin |
| ||
.Config. Filename | ap_cfg.txt |
| ||
.ACL Filename | ap_acl.txt |
| ||
.HELP URL |
|
|
|
|
.TFTP Server | 111.111.12.137 |
| ||
13.Select Use TFTP to update ALL Access Point’s and press ENTER.
Are you sure yes no? is displayed. Type y.
The Telnet session ends when the user answers y at the prompt.
To view the file transfer log, switch to the TFTP application.
The AP resets when the file transfer and FLASH programming completes.
14.Telnet to the AP using its IP address.
15.At the prompt type the
151 |
