Symbol Technologies AP-4131 manual Adding Allowed MUs, Removing Allowed MUs

Configuring the AP

2.8.3Adding Allowed MUs

The Access Control List screen provides a facility to add MUs to the ACL.

1. Select the Set Access Control List option from the Main Menu to display:

Address Type? range individual

2. Use the UP/DOWN-ARROW keys to toggle between range and

individual. Select individual.

3. Press Add-[F2]. The AP prompts for a MAC address.

00:00:00:00:00:00

4. Enter the MAC address.

Users can enter MAC addresses without colons.

5.Select Save ALL APs or press [F4] to save the Adding Allowed MU information to all APs with the same Net_ID (ESS).

This option saves the configuration changes for the current AP, sends two WNMP messages to all other APs on the Known APs table to update their configuration and resets after the configuration has been modified.

Users can perform this option only among the same hardware platforms and firmware version.

6.The system prompts Warning Update, save, and reset all APs in the Known AP Menu?

yes no Type Y.

7.Select Cancel-[ESC]to disregard any changes made to this screen and return to the previous menu.

2.8.4Removing Allowed MUs

The Allowed Mobile Units screen provides a facility to remove MUs from the ACL.

1.Highlight the entry using the UP/DOWN-ARROW keys.

2.Press Delete - [F1].

AP-4131 Access Point Product Reference Guide 115