Symbol Technologies AP-4131 manual Configuring Radio Parameters

Configuring the AP

2.5Configuring Radio Parameters

The AP automatically configures most radio parameters. Only advanced users, Symbol trained users or Symbol representatives should adjust the radio parameters for the AP or the options in the RF Configuration screen.

1.Select Set RF Configuration from the Main Menu to display:

Symbol Access Point
		RF Configuration
.DTIM Interval			10		WLAP Mode	Disabled
.BC/MC Q Max			10
.Max Retries (d)			15		WLAP Priority	8000 hex
.Max Retries (v)			5		WLAP Manual BSS ID	00:00:00:00:00:00
.Multicast Mask (d) 09000E00				hex
.Multicast Mask (v) 01005E00				hex	WLAP Hello Time	20
.Beacon Interval			100	K-us	WLAP Max Age	100
.Accept Broadcast ESSID			Enabled		WLAP Forward Delay	5
.MU Inactivity Timeout			60	min.	WLAP MU Table Aging Time 240 min.
.Rate Control
11	Mb/s		Optional
5.5 Mb/s			Optional
2	Mb/s		Required
1	Mb/s		Required
.RTS Threshold			2347 bytes
					.Short RF Preamble	Disabled
.Extended Range			0 mi.		Tx Power Control	Full
					EPP Setup - [F3]
					EIAP Setup - [F4]
	OK-[CR]	Save-[F1]			Save All APs-[F2]	Cancel-[ESC]

The frequency of DTIM packets as a multiple of TIM packets. Range(1..255)

The dot in front of certain parameters, functions or options (for example .Rate Control) indicates these items update to all APs with the same Net_ID (ESS) when choosing the Save ALL APs-[F2]option. Users can perform this option only among the same hardware platforms and same firmware versions.

AP-4131 Access Point Product Reference Guide 71