Configuring the AP
2.19 Resetting the AP
Resetting an AP clears statistics and restores the last saved configuration. If users make unsaved changes, the AP clears those changes and restores the last saved configuration on reset.
•Select Special Functions from the Main Menu.
•Select Reset AP.
The AP flashes its LEDs as if powering up and returns to a
2.20 Restoring the Factory Configuration
If the AP fails to communicate due to improper settings, restore the factory configuration defaults. Restoring configuration settings clears all configuration and statistics for the AP depending on the DHCP setting.
DHCP Disabled All AP configuration and statistics are reset, except the AP Installation screen
DHCP Enabled All AP configuration and statistics are reset.
To restore factory configuration:
1.Select Special Functions from the Main Menu.
2.Select Restore Factory Config. The AP erases all configuration information and replaces it with the factory configuration.
3.The AP automatically resets.
When the factory configuration is restored, the ACL list is erased. The Country Configuration and Channel Setting are not erased.
157 |
