![](/images/new-backgrounds/1108587/108587109x1.webp)
Configuring the AP
To access the AP UI using a Web browser from a workstation:
1.From the NCPA properties window set the IP address of the workstation and the subnet mask. The system tells the user to reboot for property changes to take effect.
The workstation, in this case, is the workstation or laptop computer running the Web browser.
2. To verify the connection, ping the AP. At the default DOS prompt, type:
Ping
–If the ping receives no response, verify that the hardware connections, IP address, gateway address and subnet mask are correct. If correct, contact the site System Administrator for network assistance.
3.Start a Web browser such as Internet Explorer 4.0 or greater, or Netscape 3.0 or greater.
Type the IP Address for the associated AP to access the AP using a Web browser:
http://xxx.xxx.xxx.xxx
45 |