![](/images/new-backgrounds/1108587/108587309x1.webp)
Configuring the AP
5.Select the correct communication port, typically Direct to Com1, along with the following parameters:
emulation | ANSI |
baud rate | 19200 bps |
data bits | 8 |
stop bits | 1 |
parity | none |
flow control | none |
6.Select OK.
7.Press ENTER to display the Main Menu.
Symbol Access Point |
|
| MAIN MENU |
Show System Summary | AP Installation |
Show Interface Statistics | Special Functions |
Show Forwarding Counts | Set System Configuration |
Show Mobile Units | Set RF Configuration |
Show Known APs | Set Access Control List |
Show Ethernet Statistics | Set Address Filtering |
Show RF Statistics | Set Type Filtering |
Show Misc. Statistics | Set SNMP Configuration |
Show Event History | Set Event Logging Configuration |
Enter Admin Mode |
|
8. Select Enter Admin Mode and type the password:
Symbol
The password is
145 |