Symbol Technologies AP-4131 manual Media Types, Essid

Introduction

Program the DHCP or BOOTP server to transfer these files (Kerberos security information, HTML, firmware or network configuration files) with these DHCP options for the specific file or information to download:

DHCP Option	Value
Firmware and HTML file	67 (filenames are separated by a space)
ESSID	128
Configuration filename	129
ACL filename	130
Kerberos enable/disable flag	131(set to 0 for disable or 1 for enable on
	the DHCP server)
KDC name	132
KSS name	133
KSS port number	134

When the AP receives a network configuration change or is not able to renew the IP address lease the AP sends out an SNMP trap if SNMP is configured.

1.3.4Media Types

The AP supports bridging between Ethernet and radio media.

The Ethernet interface fully complies with Ethernet Rev. 2 and IEEE 802.3 specifications. The 4131 AP supports a 10/100Base-T wired connection. The data transfer rate is 11 Mbps.

The radio interface conforms to IEEE 802.11 specifications. The interface operates at 11 Mbps using direct-sequence radio technology. The AP supports multiple-cell operations with fast roaming between cells. With the direct-sequence system, each cell operates independently. Each cell provides an 11 Mbps bandwidth. Adding cells to the network provides increased coverage area and total system capacity. The AP supports MUs operating in Power Save Polling (PSP) mode or Continuously Aware Mode (CAM) without user intervention.

16 AP-4131 Access Point Product Reference Guide