Introduction

Mobile Units receiving a direct-sequence transmission use the spreading code to map the chips within the chipping sequence back into bits to recreate the original data transmitted by the access point. Intercepting and decoding a direct-sequence transmission requires a predefined algorithm to associate the spreading code used by the transmitting access point to the receiving MU. This algorithm is established by IEEE 802.11b specifications. The bit redundancy within the chipping sequence enables the receiving MU to recreate the original data pattern, even if bits in the chipping sequence are corrupted by interference.

The ratio of chips per bit is called the spreading ratio. A high spreading ratio increases the resistance of the signal to interference. A low spreading ratio increases the bandwidth available to the user. The access point uses a constant chip rate of 11Mchips/s for all data rates, but uses different modulation schemes to encode more bits per chip at the higher data rates. The access point is capable of an 11 Mbps data transmission rate, but the coverage area is less than a 1 or 2 Mbps access point since coverage area decreases as bandwidth increases.

1.3.6MU Association Process

APs recognize MUs as they associate with the AP. The AP keeps a list of the MUs it services. MUs associate with an AP based on the following conditions:

•the signal strength between the AP and MU

•MUs currently associated with the AP

•the MUs encryption and authentication capabilities and the type enabled

•the MUs supported data rates (1 Mbps, 2 Mbps, 5.5 Mbps or 11 Mbps).

MUs perform preemptive roaming by intermittently scanning for APs and associating with the best available AP. Before roaming and associating with APs, MUs perform full or partial scans to collect AP statistics and determine the direct-sequence channel used by the AP.

AP-4131 Access Point Product Reference Guide

19

Page 28 Page 30
Page 29
Image 29
Symbol Technologies AP-4131 manual MU Association Process
Page 28 Page 30

AP-4131 specifications

The Symbol Technologies AP-4131 is a high-performance access point designed for businesses seeking reliable wireless networking solutions. With its robust features and advanced technologies, the AP-4131 paves the way for seamless connectivity in a variety of environments, including offices, warehouses, and retail spaces.

One of the standout features of the AP-4131 is its support for dual-band operation, enabling it to efficiently transmit and receive data across both 2.4 GHz and 5 GHz frequency bands. This dual-band functionality minimizes interference and allows for optimal performance even in densely populated areas with multiple wireless devices.

The AP-4131 employs the 802.11a/b/g/n standards, offering data rates of up to 300 Mbps. This capability ensures that users experience fast and reliable wireless connectivity, whether for bandwidth-intensive applications or simple web browsing. Additionally, its MIMO (Multiple Input Multiple Output) technology significantly enhances the signal quality and overall network performance, allowing more devices to connect simultaneously without degrading performance.

In terms of security, the AP-4131 provides advanced encryption protocols, including WPA2, to safeguard data transmission and mitigate the risk of unauthorized access. This emphasis on security is vital for organizations handling sensitive information and needing to protect their networks from potential threats.

The device is also equipped with Power over Ethernet (PoE) support, simplifying installation by allowing power and data to use a single cable. This feature enables flexible placement of the access point without the need for separate power sources, making it convenient for deployment in various locations.

Moreover, the AP-4131 features built-in management capabilities, allowing IT administrators to monitor and manage network performance easily. Its centralized management system facilitates the quick configuration of access points across the organization, streamlining maintenance and troubleshooting processes.

Another notable characteristic of the AP-4131 is its rugged design, built to withstand harsh environmental conditions. This makes it suitable for outdoor deployments or areas subject to extreme temperatures and conditions.

In summary, the Symbol Technologies AP-4131 is an advanced access point that combines dual-band performance, robust security features, and flexible deployment options, making it a valuable asset for businesses aiming to enhance their wireless networking capabilities. Its combination of cutting-edge technologies and reliable performance positions it as a top choice for organizations looking to build a strong, secure, and efficient wireless infrastructure.
Top Page Image Contents