![](/images/new-backgrounds/1108587/108587217x1.webp)
Configuring the AP
2.Configure the
Quiet Period The time the access point waits before attempting to acquire an MU. Default is 60 seconds.
Tx Period | Defines the length of time the access points waits |
| for an MU’s response once the access point |
| requests an MUs identity. Default is 30 seconds. |
| When enabled, the access point forces the MU to |
|
|
| Default is Enabled. |
Defines the length of time a MU is waits before | |
| initiating |
| Default is 3600 seconds. |
Defines the number of MU | |
| attempts permitted. Default is 2. If exceeded, the |
| access point fails MU |
Supplicant | Time permitted for a response from the |
Timeout | authenticating MU. Default is 30 seconds. |
Server Timeout | Time permitted for a response from the |
| authentication server. Default is 30 seconds. |
Max Req Retries | Defines the maximum number of times an access |
| point |
IAS Name/IP | Name or IP address of the authentication server. |
Address |
|
Backup IAS | Name or IP address of the backup authentication |
Name/IP | server. |
IAS Password | The shared secret password between the access |
| point and authentication server. |
99 |