Configuring the AP
The PassKey can be no longer than 32 characters in length.
2.Select the desired key and enter the new value to change the Key value.
3.Verify and change the values as needed to reflect the network environment.
4.Select OK or Save to register settings by writing changes to NVM. Selecting Save displays a confirmation prompt.
5.Select Save ALL APs or press [F2] to save the Encryption Key Maintenance information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP, sends two WNMP messages to all other APs on the Known APs table to update their configuration and resets after the configuration has been modified.
Users can perform this option only among the same hardware platforms and firmware version.
6.The system prompts Warning Update, save, and reset all APs in the Known AP Menu?
yes no Type Y.
7.Select
Key values are displayed in plain text while being entered. Once saved, the keys are displayed as all zeros (default display is all zeros).
91 |
