![](/images/new-backgrounds/1108587/108587339x1.webp)
Monitoring Statistics
2. Configure the AP system settings as required:
Unit Name | Identifies the AP name. |
MAC Address (BSS) | Identifies the unique |
| Access Control address. |
IP Address | Identifies the |
| address. |
Net_ID (ESS) | Identifies the unique |
| alphanumeric, |
Channel | Identifies the |
| the access point. The channel used is within the |
| range required for the operating country. |
Country | Identifies AP country code that in turn determines |
| the AP |
Antenna Selection | Indicates if the AP is configured for Full |
| Diversity, Primary Only, Secondary Only, or Rx |
| Diversity. |
Shared Key | Enabled or Disabled indicates whether or not the |
| secret key used by the KSS and access point |
| (defined in the Configure Kerberos |
| Authentication window) is currently being used. |
Kerberos | Enabled or Disabled indicates whether or not the |
| Kerberos encryption algorithm is being used with |
| the access point. |
EAP/TLS | Enables Windows XP MUs to use EAP/TLS for |
| authentication using 40 or |
Key Width | Displays the encryption algorithm key width |
| |
| access point. |
Start Flashing All | Begins a test routine to check the LED |
LEDs | functionality and allows the user to determine |
| the AP location. |
Reset AP | Clears the APs statistics and restores the last |
| saved configuration. |
160 |
|