HP 7000 dl Router manual Ethernet Interface Configuration Command SET

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

ETHERNET INTERFACE CONFIGURATION COMMAND SET

There are several types of Ethernet interfaces associated with the Secure Router OS:

•Basic Ethernet interfaces (e.g., eth 0/1)

•Ethernet sub-interfaces associated with a VLAN (e.g., eth 0/1.1)

•Ethernet switch (e.g., eth 0/1, 0/2)

To activate the basic Ethernet Interface Configuration, enter the interface ethernet command at the Global Configuration Mode prompt. For example:

Router>enable

Router#configure terminal

Router(config)#interface ethernet 0/1

Router(config-eth 0/1)#

To activate the Ethernet Sub-Interface Configuration, enter the interface ethernet command at the Global Configuration Mode prompt. For example:

Router>enable

Router#configure terminal

Router(config)#interface ethernet 0/1.1

Router(config-eth 0/1.1)#

To activate the Ethernet Switch Configuration, enter the interface range command at the Global Configuration Mode prompt. For example:

Router>enable

Router#configure terminal

Router(config)#interface range ethernet 0/1, 0/2

Router(config-eth 0/1, 0/2)#

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 433